PLC Controlled & Remotely Monitored & High Performance

Pulsarlube PLC

The Pulsarlube PLC is specially designed to be fully integrated with a PLC system and offered in two types; MONTH and INTERVAL type.

PLC Control

Programmed to deliver fresh lubricant upon receiving a signal from the PLC

Communication

In case of any warning messages, the unit sends out a signal to an external alarm

Convenient

Both NPN and PNP connections are available

2 Types

MON type dispenses at predetermined intervals and rates depending on the monthly setting selected. INT type dispenses on command when a signal is received from the PLC, at the rate selected by the user.

Overview

The Pulsarlube PLC Series 60, 120, 240, 480

The Pulsarlube PLC electromechanical automatic grease lubricator is specially designed to be fully integrated as well as be synchronized to a PLC system .Kindly offers two types of PLC lubricator, Month and Interval type for wider range of usage. For Month type, dispensing interval is calculated based on the lubricator and discharges only when the machine is in operation.
For interval type, dispensing interval is calculated by PLC and provides the selective modes for discharging a predefined lubricant amount. Pulsarlube PLC is ideal for lubricating a wide variety of robots, conveyors, roller-slide bearing, motor shaft seals, generators, pumps, fans and many other linear guide systems. In case of any malfunctioning, it allows the user to manage and obtain necessary data of the lubricator remotely from a central control unit (PLC panel) without having to go on-site.

60 ml120 ml240 ml480 ml
  • PLC60 :Ø91mm(3.60") x 181mm(7.13") (H)
  • PLC125 :Ø91mm(3.60") x 181mm(7.13") (H)
  • PLC240 :Ø91mm(3.60") x 208mm(8.19") (H)
  • PLC480 :Ø92mm(3.62") x 260mm(10.23") (H)

Cross Section

Features & Benefits

PLC Control

Programmed to deliver fresh lubricant upon receiving a signal from the PLC

Communication

In case of any warning messages, the unit sends out a signal to an external alarm

Convenient

Both NPN and PNP connections are available

2 Types

MON type dispenses at predetermined intervals and rates depending on the monthly setting selected.INT type dispenses on command when a signal is received from the PLC, at the rate selected by the user.

Service Pack

Substantial savings from the use of replaceable grease pouches and battery packs (Service Pack)

Spec & Certification

> Technical Specifications
Spec Description
Grease Capacity 60ml/120ml/240ml/480ml (replaceable)
Remote Installation Max. 10m (33ft) with O.D. Ø6mm tube
Power Supply External Power Supply
Multi-Point Installation Max. 6m (20ft) with O.D. Ø6mm tube (Max. 8 lube points)
Operating Pressure 30~60kgf/cm² (425~850psi)
Operating Temperature -20˚C~60˚C (-4˚F~140˚F)
1 Per Stroke(@20˚C) MONTH type : 0.34ml / Stroke
INTERVAL type : 0.34ml x Mode selected
Dispensing Periods MONTH type : 1, 2, 3…10,11,12 month
INTERVAL type : Mode 1,2,3…6
Packaging 10 Units/Case
> Product Certifications
Certification Description
CE EN 61000-6-4:2007/A1:2011, EN 61000-6-2:2005
KC MSIP-REM-KLT-PLC480
IP Code IP65

Accessories

Part No. Image DESCRIPTION
A001 Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002 Reducer, 3/8"F x 1/8"M Adaptor (Brass)
A002-S Reducer, 3/8"F x 1/8"M Adaptor (Steel)
A011 Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012 Socket, 1/8"F x 1/8"F Adaptor (Brass)
A019 90° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A020 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A021 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A022 90° Elbow, 1/8”M X1/8”F Adaptor (Brass)
A023 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A024 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
A106 Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107 Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108 Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109 Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
A121 Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122 Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123 Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124 Pipe,1/4”M X 1/4”M × 200mm (Steel)
A212-1 Distribution Tubing, O.D. 5/16”(8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)
A214-1 Distribution Tubing, O.D. 1/4”(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A240 Tube Fitting, Push-In Type, PC6-PT1/8”M
B002 Mounting Bracket, "L"Shape
B051 Self Drilling Screw, #8 x 20
B057 Washer
B058 Tooth Washer
A243 Thread Converter, PT1/8"F X NPT1/8"M (Brass)
HU Type Divider Block HU-2RS, Grease Type, 2 Ports
HU-3RS, Grease Type, 3 Ports
HU-4RS, Grease Type, 4 Ports
HU-5RS, Grease Type, 5 Ports
HU-6RS, Grease Type, 6 Ports
HU-7RS, Grease Type, 7 Ports
HU-8RS, Grease Type, 8 Ports

Applications


- Chains
- Lifts
- Electric Motors Conveyors Loaders
- HVAC Systems

- Linear Guides

Installations

Connection to PLC equipment (For both models, MONTH type & INTERVAL type)

Connection to External Power Supply (DC Adapter) (MONTH type only)

Contact Us

Please select your business location on the map.
You can get direct feedback from regional subsidiary with one click.

 Placeholder