Synchronized Lubricator with an Intelligent Vibration Sensor

Pulsarlube Mi

Pulsarlube Mi operates only when vibration is detected on the installed application.

No Wire

No need for external electric wiring to motors or other power cables

Vibration Sensor

Vibration sensor allows the unit to lubricate only when the application is operating

Simple & Precise

Simple to operate & dispenses precise amounts of lubricant reliably

Service Pack

Substantial savings from the use of replaceable grease pouches and battery packs (Service Pack)

Overview

The Pulsarlube Mi Series 60, 125

The Pulsarlube Mi automatic grease lubricator is innovatively designed to detect the operation of industrial rotational machinery by using a piezoelectric vibration sensor. This piezoelectric sensor is composed of a ceramic strain transducer attached to a metallic proof mass in order to respond to an externally imposed acceleration. The Pulsarlube Mi periodically checks the operating status of the machinery which it is attached to.

As the Pulsarlube Mi receives a vibration signal from the machinery, the unit will dispense an adequate amount of fresh lubricant in line with the operation of machinery. If there is no vibration signal detected, the unit will automatically go into stand-by mode to avoid the problems involving over-lubrication.

60 ml125 mlVibration Detector
  • Mi60: Ø91mm(3.60") x 181mm(7.13") (H)
  • Mi125: Ø91mm(3.60") x 181mm(7.13") (H)

Cross Section

Features & Benefits

Vibration Sensor

Vibration sensor allows the unit to lubricate only when the application is operating

No Wire

No need for external electric wiring to motors or other power cables

Simple & Precise

Simple to operate & dispenses precise amounts of lubricant reliably

Service Pack

Substantial savings from the use of replaceable grease pouches and battery packs (Service Pack)

Spec & Certification

> Technical Specifications
Spec Description
Grease Capacity 60ml/125ml/250ml (replaceable)
Remote Installation Max. 10m (30ft) with O.D. Ø6mm tube
Power Supply DC 4.5V Battery Pack
Multi-Point Installation Max. 6m (20ft) with O.D. Ø6mm tube (Max. 8 lube points)
Operating Pressure 30~60kgf/cm² (425psi~850psi)
Vibration Detector • Piezoelectric Cantilever-type Film Sensor
• Adjustable Sensitivity Range
• Connection Wire Length : 1.2m
Operating Temperature Standard Alkaline Battery : -15˚C~60˚C (5˚F~140˚F)
Optional Lithium Battery :-40˚C~60˚C (-40˚F~140˚F)
Dispensing Periods 1, 2, 3…10, 11,12 month
Packaging 10 Units/Case
> Product Certifications
Certification Description
CE DC 4.5 V
KC MSIP-REM-KLT-MI250

Accessories

Part No. Image DESCRIPTION
A001 Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002 Reducer, 3/8"F x 1/8"M Adaptor (Brass)
A002-S Reducer, 3/8"F x 1/8"M Adaptor (Steel)
A011 Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012 Socket, 1/8"F x 1/8"F Adaptor (Brass)
A019 90° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A020 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A021 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A022 90° Elbow, 1/8”M X1/8”F Adaptor (Brass)
A023 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A024 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
A106 Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107 Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108 Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109 Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
A121 Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122 Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123 Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124 Pipe,1/4”M X 1/4”M × 200mm (Steel)
A212-1 Distribution Tubing, O.D. 5/16”(8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)
A214-1 Distribution Tubing, O.D. 1/4”(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A240 Tube Fitting, Push-In Type, PC6-PT1/8”M
B002 Mounting Bracket, "L"Shape
B051 Self Drilling Screw, #8 x 20
B057 Washer
B058 Tooth Washer
A243 Thread Converter, PT1/8"F X NPT1/8"M (Brass)
HU Type Divider Block HU-2RS, Grease Type, 2 Ports
HU-3RS, Grease Type, 3 Ports
HU-4RS, Grease Type, 4 Ports
HU-5RS, Grease Type, 5 Ports
HU-6RS, Grease Type, 6 Ports
HU-7RS, Grease Type, 7 Ports
HU-8RS, Grease Type, 8 Ports

Applications


HAVC SYSTEMS
- Electric Motors
- Blowers
- Pumps

ELECTRIC MOTORS
- Electric Motors
- Fans
- Pumps

Installations

Place the vibration detector on the steel housing.
Caution 1. Place near the rotation axis for more precise vibration detection.
2. The detector must be placed vertically with the yellow cap facing downwards.
3. Wire length from the Mi main unit is 1.2m(4ft).
Install the unit using proper adaptor for the bearing grease nipple.
Note Please refer to the enclosed user manual in order to set up the vibration sensor setting properly.
For more technical questions, contact Customer Service team for further assistance.

Contact Us

Please select your business location on the map.
You can get direct feedback from regional subsidiary with one click.

 Placeholder