Machine Synchronized

Pulsarlube MS & MSP

The Pulsarlube MS & MSP units offer the advantage of providing automatic lubrication to machinery that is infrequently or intermittently used by synchronizing itself to the equipment, thereby avoiding the problem of over lubrication.

Synchronized

Dispenses a preset amount of lubricant only when equipment is in operation Synchronized which prevents over lubrication

MAX 80kgf/cm²

Up to 8 lube points for multi-point installation
Max. 10m (30ft) for single point

Overview

The Pulsarlube MS & MSP Series 125, 250, 500

The Pulsarlube MS electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MS will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. If the equipment is not operating, then the Pulsarlube MS goes into "stand-by mode" and does not dispense lubricant until the machine goes back into operation.

The Pulsarlube MSP electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MSP will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. Unlike the Pulsarlube MS, this product is a machine synchronized, externally powered unit and the power supply connected to the machine or PLC powers the unit. It is not necessary to replace the battery pack in the unit up to 5 years but the grease pouch should still be replaced after completion of each lubrication cycle set.

125 ml250 ml500 ml
  • M125 : Ø91mm(3.60") x 181mm(7.13") (H)
  • M250 : Ø91mm(3.60") x 210mm(8.27") (H)
  • M500 : Ø92mm(3.62") x 260mm(10.23") (H)

MS/MSP Features
The MS and MSP units both synchronize to machinery but are engineered differently in order to meet customer's specifications for their equipment.

MS : Uses a battery pack as its power source. MS+Relay Box+Service Pack
MSP : Uses external power as its power source. MSP+Relay Adapter(VAC or VDC)+Service Pack

* A battery pack is still included and used for backup power but does not need to be replaced for an extended period of time (up to 5 years).
* OL500 is also available for MSP feature.

MSMSP
RelayVACVDC
Voltage Rate Input RangeAC100-480V, 0.5W/50~60HzAC Adaptor (100~220V)DC-DC Convertor (12~24V)
Voltage Rate Output RangeSignal (Open collector type)5.0V, 2A
Power ON IndicatorRed LED
Relay Box Dimensions85mm (D) x 49mm (W) x 32mm (H)
Wire LengthInput 1m (3ft) / Output 4m (13ft)

Cross Section

Features & Benefits

Synchronized

Dispenses a preset amount of lubricant only when equipment is in operation, Synchronized which prevents over lubrication

Max 60kgf/cm²

Up to 8 lube points for multi-point / Max. 10m (33ft) for single point

LCD

Easy to program with built-in LCD and simple button controls

Service Pack

Substantial savings from the use of replaceable grease pouches and battery packs (Service Pack)

Spec & Certification

> Technical Specifications
Spec Description
Grease Capacity 125ml/250ml/500ml (replaceable)
Remote Installation Max. 10m (33ft) with O.D. Ø6mm tube
Power Supply MS : DC 4.5V Battery Pack
MSP : External Power Supply
Multi-Point Installation Max. 6m (20ft) with O.D. Ø6mm tube (Max. 8 lube points)
Operating Pressure Avg. 30kgf/cm² (425psi)
Max. 80kgf/cm² (1,130psi)
Operating Temperature Standard Alkaline Battery : -15˚C~60˚C (5˚F~140˚F)
Optional Lithium Battery : -40˚C~60˚C (-40˚F~140˚F)
Dispensing Periods 125ml/250ml : 1, 2, 3, 6, 12 month & H (15 days)
500ml : 1, 2, 4, 6, 12, 18, 24 month & H (15 days)
Packaging 10 Units/Case
> Product Certifications
Certification Description
IP Code N/A
etc. N/A
> MS Relay / MSP Power Supply Specification
MS MSP
Relay VAC VDC
Voltage Rate Input Range AC100-480V, 0.5W/50~60Hz AC Adaptor (100~220V) DC-DC Convertor (12~24V)
Voltage Rate Output Range Signal (Open collector type) 5.0V, 2A
Power ON Indicator Red LED
Relay Box Dimensions 85mm (D) x 49mm (W) x 32mm (H)
Wire Length Input 1m (3ft) / Output 4m (13ft)

Accessories (Common Accessories M,MSP,MS,PLC)

Part No. Image DESCRIPTION
A001 Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002 Reducer, 3/8"F x 1/8"M Adaptor (Brass)
A002-S Reducer, 3/8"F x 1/8"M Adaptor (Steel)
A011 Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012 Socket, 1/8"F x 1/8"F Adaptor (Brass)
A019 90° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A020 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A021 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A022 90° Elbow, 1/8”M X1/8”F Adaptor (Brass)
A023 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A024 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass)
A106 Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107 Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108 Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109 Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)
A121 Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122 Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123 Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124 Pipe,1/4”M X 1/4”M × 200mm (Steel)
A212-1 Distribution Tubing, O.D. 5/16”(8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)
A214-1 Distribution Tubing, O.D. 1/4”(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A240 Tube Fitting, Push-In Type, PC6-PT1/8”M
B002 Mounting Bracket, "L"Shape
B051 Self Drilling Screw, #8 x 20
B057 Washer
B058 Tooth Washer
A243 Thread Converter, PT1/8"F X NPT1/8"M (Brass)
HU Type Divider Block HU-2RS, Grease Type, 2 Ports
HU-3RS, Grease Type, 3 Ports
HU-4RS, Grease Type, 4 Ports
HU-5RS, Grease Type, 5 Ports
HU-6RS, Grease Type, 6 Ports
HU-7RS, Grease Type, 7 Ports
HU-8RS, Grease Type, 8 Ports

Applications

SEMICONDUCTORS
- Air Handling Units
- Clean Rooms
- Cooling Towers
- SMD PLB Lines
- LCD Panels
- Loader Robots
- Web Scrubbers

MACHINE TOOLS

Installations

Reducer

Part No.DESCRIPTION
A001Reducer, 3/8"F X 1/4"M Adaptor (Brass)
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
A002-SReducer, 3/8"F x 1/8"M Adaptor (Steel)

Socket + Pipe + Reducer

Part No.DESCRIPTION
A011Socket, 1/4"F x 1/4"F Adaptor (Brass)
A012Socket, 1/8"F x 1/8"F Adaptor (Brass)
Part No.DESCRIPTION
A121Pipe,1/4”M X 1/4”M × 50mm (Steel)
A122Pipe,1/4”M X 1/4”M × 100mm (Steel)
A123Pipe,1/4”M X 1/4”M × 150mm (Steel)
A124Pipe,1/4”M X 1/4”M × 200mm (Steel)
Part No.DESCRIPTION
A106Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)
A107Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)
A108Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)
A109Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)

45˚ Elbow

Part No.DESCRIPTION
A02345° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02445° Elbow, 1/8”M X 1/8”F Adaptor (Brass)

90˚ Elbow

Part No.DESCRIPTION
A01990° Elbow, 1/4”F X 1/4”F Adaptor (Brass)
A02090° Elbow, 1/8”F X 1/8”F Adaptor (Brass)
A02190° Elbow, 1/4”M X 1/4”F Adaptor (Brass)
A02290° Elbow, 1/8”M X1/8”F Adaptor (Brass)

If the bearing lube point is NPT, use the thread converter (A243) to convert thread metric to inch for bearing zerk (USA only).

Comments

1. All Parts should be assembled tightly with PTFE tape.
2. For optimal performance with remote installation kits, using an NLGI #1 grade grease is recommended.
3. If the bearing lube point is NPT, use the thread converter.

Kit No. 1250RC-1

Part No.DESCRIPTION
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
B002Mounting Bracket, “L”Shape
B051Self Drilling Screw, #8ⅹ20
B057Washer
A012Socket, 1/8”F x 1/8”F Adaptor (Brass)
A240Tube Fitting, Push-In Type, PC6-PT1/8”M
A214-1Distribution Tubing, O.D. 1/4"(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)

For remote installations, all accessories are sold separately.

Electromechanical Products using a divider block ( up to 8 points )

Part No.DESCRIPTION
A002Reducer, 3/8"F X 1/8"M Adaptor (Brass)
B002Mounting Bracket, “L”Shape
B051Self Drilling Screw, #8ⅹ20
HU-2RS ~ HU-8RSHU Type Divider Block, Grease Type, 2 Ports ~ 8 Ports
B058Tooth Washer
A240Tube Fitting, Push-In Type, PC6-PT1/8”M
A214-1Distribution Tubing, O.D. 1/4"(6mm) Nylon Tubing, 10ft Pre-filled with (Grease Type)
A243Thread Converter, PT1/8"F X NPT1/8"M (Brass)

Contact Us

Please select your business location on the map.
You can get direct feedback from regional subsidiary with one click.

 Placeholder